Climacool IOM FLEX SERIES Manuel d'utilisateur télécharger pdf (Page 29)

www.climacoolcorp.com

27

Start Up & Warranty Form

Start-Up Water Cooled Rev0807

Project Name: _________________________________ Start-Up Date: __________________

Address: __________________________________

__________________________________

Module #: ______________ Model #: ____________ Serial Number: __________________

Chiller # _______ Bank # _________ On-Site Location: _________________________

Evaporator entering pressure _______ Evaporator leaving pressure _______ Δ P_______

Condenser entering pressure _______ Condenser leaving pressure _______ Δ P_______

Evaporator & condenser “flow devices” shut off chiller below aprox. 25% loss of flow _________

Water Samples taken (Mark “X”) Evaporator ___ Condenser _____

Water sample bottles are provided. Follow instructions on label and mail same day sample is taken.

All wiring terminations in module panel, safeties and compressors tightened _____

Voltage / Ground L1 ________ L2 ________ L3 ________

Phase / Phase L1/ L2 ________ L2/ L3 ________ L1/ L3 ________

Circuit # 1

Amperage L1 ________ L2 ________ L3 ________

_____ leveL liO ssalG thgiS ___ Comments: _____________________

Suction Pressure ________ _______________________________

Suction Temperature ________ _______________________________

Discharge Pressure ________ _______________________________

Compressor Superheat ________ _______________________________

Evaporator Entering Water Temperature ________ _______________________________

Evaporator Leaving Water Temperature ________ _______________________________

Condenser Entering Water Temperature ________ _______________________________

Condenser Leaving Water Temperature ________ ________________

_______________

Evaporator Pressure Differential ________ _______________________________

Condenser Pressure Differential ________ _______________________________

2 # tiucriC

Amperage L1 ________ L2 ________ L3 ________

_____ leveL liO ssalG thgiS ___ Comments: _____________________

Suction Pressure ________ _______________________________

Suction Temperature ________ _______________________________

Discharge Pressure ________ _______________________________

Compressor Superheat ________ _______________________________

Evaporator Entering Water Temperature ________ _______________________________

Evaporator Leaving Water Temperature ________ _______________________________

Condenser Entering Water Temperature ________ _______________________________

Condenser Leaving Water Temperature ________ _______________________________

Evaporator Pressure Differential ________ _______________________________

Condenser Pressure Diffe

rential

________ _______________________________

Verify Safety Settings: Low Limit____ High Pressure Limit ____Low Pressure Limit ____

NOTE: Correct rotation of scroll compressors is extremely critical. Incorrect rotation could damage the compressor.

Contractor Name: ___________________________ __________________________________

Address: ___________________________

(Authorized Signature)

___________________________

Phone: ___________________________ Date: _____________________________

Start-Up and Warranty Registration Form

(Water-Cooled)

Sign & date and fax: (405) 745-2072 Attn.: Vivian Doyle / Dennis Megaro

Or E-mail: customerservice@climacoolcorp.com

T H E U L T I M A T E C H I L L E R S O L U T I O N

®

Climacool IOM FLEX SERIES Manuel d'utilisateur Page 29

Commentaires sur ces manuels

Climacool IOM FLEX SERIES Manuel d'utilisateur Page 29

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Climacool IOM FLEX SERIES